Cisco Cisco Aironet 1600i Access Point 기술 매뉴얼

wgb(config)#interface dot11Radio 0

wgb(config−if)#station−role workgroup−bridge

In order to create the SSID on the root AP, navigate to Security > SSID Manager. This procedure is
the same as the one used to create the SSID on the workgroup bridge.

1. 

In order to configure the AP role as root, navigate to Network > Network Interface > Choose the
correct radio interface > Settings. Choose the role in the radio network to be the AP as shown here:

2. 

In order to configure the SSID, enter:

root(config)#dot11 ssid wgb

root(config−ssid)#authentication open

1.