Cisco Cisco WAP121 Wireless-N Access Point with Single Point Setup 설치 가이드
6
Cisco WAP121 and WAP321 Wireless-N Access Points
Verifying the Hardware Installation
To verify the hardware installation, complete the following tasks:
• Check the cable connections.
• Check the state of the indicator lights.
N
OTE
If you need help resolving a problem, visit the Cisco Support
Community at
.
Label
Activity
Description
Power
Off
Power is off
Solid Green
Power is on. Normal operation using an
external power adaptor.
external power adaptor.
Solid Amber
Power is on. Normal operation using PoE.
Flashing
Booting/Firmware upgrade
WLAN
Off
Wireless is disabled, for both 2.4 GHz and
5 GHz wireless networks
5 GHz wireless networks
Solid Green
Wireless 2.4 GHz band is enabled.
Solid Amber
Wireless 5 GHz band is enabled.
Flashing
Transmitting/Receiving Data
Flashing Fast (2x
Flashing rate)
Flashing rate)
Wi-Fi Protected Setup (WPS) is synchronizing
LAN
Off
No Ethernet Link
Solid Green
Ethernet link is active.
• FE link is detected for Cisco WAP121
• GE link is detected for Cisco WAP321
Solid Amber
Ethernet link is active.
• FE link is detected for Cisco WAP321
Flashing
Transmitting/Receiving Data
5