Cisco Cisco WAP121 Wireless-N Access Point with Single Point Setup 설치 가이드

To configure the wireless access points, follow these steps to access the 
Wizard and then the web-based configuration utility from your computer.

Connect the wireless access point to the same network (IP subnet) 
as your computer. The factory default IP address configuration of 
the access points is DHCP. Make sure your DHCP server is running 
and can be reached. 

See 

 for troubleshooting 

information, or if you do not have a DHCP server. 

Locate the IP address of the wireless access point. 

a.

The wireless access points can be accessed and managed by 
Cisco network tools and services including the Cisco FindIT 
Network Discovery Utility that enables you to automatically 
discover all supported Cisco devices in the same local 
network segment as your computer. You can get a snapshot 
view of each device or launch the product configuration utility 
to view and configure the settings. For more information, see 

.

b. The wireless access points are Bonjour-enabled and 

automatically broadcast their services and listen for services 
being advertised by other Bonjour-enabled devices. If you 
have a Bonjour-enabled browser, such as Microsoft Internet 
Explorer with a Bonjour plug-in, or the Apple Mac Safari 
browser, you can find the wireless access point on your local 
network without knowing its IP address. 

You can download the complete Bonjour for Internet Explorer 
browser from Apple’s Web site by visiting 

. 

c.

Locate the IP address assigned by your DHCP server by 
accessing your router/DHCP Server; see your DHCP server 
instructions for information. 

Launch a web browser, such as Internet Explorer or Mozilla Firefox.

In the Address field enter the default DHCP address and press the 
Enter key.

Enter the default user name of cisco and password of cisco in the 
User Name and Password fields.

Click Login. The Wireless Access Point Setup Wizard appears.