Cisco Cisco WAP131 Wireless-N Dual Radio Access Point with PoE 설치 가이드

• Ambient Temperature—To prevent the Cisco WAP131 from 

overheating, do not operate it in an area that exceeds an ambient 
temperature of 104°F (40°C).

• Air  Flow—Both side panels have vents that must be unobstructed to 

prevent overheating.

• Mechanical Loading—The Cisco WAP131 should be level, stable, and 

secure to prevent it from sliding or shifting out of position. 

The default configuration of the Cisco WAP131 has the Wi-Fi radio turned 
off. You must perform the initial configuration using a wired Ethernet 
connection. 

To connect the Cisco WAP131 to the wired network:

Connect the Ethernet cable to the Ethernet port of a switch, a router, 
or a PC. 

Connect the other end of the network Ethernet cable to the 
Ethernet port of the Cisco WAP131. 

If PoE is not provided, plug in the supplied power adapter to 
provide power to the Cisco WAP131. 

After installation, all lights should be active. Refer to 

 for details about the different lights on the Cisco 

WAP131.