Cisco Cisco WAP131 Wireless-N Dual Radio Access Point with PoE 설치 가이드

To configure the Cisco WAP131, follow these steps to access the
web-based Configuration Utility and then the Setup Wizard from your 
computer:

Connect the Cisco WAP131 to the same network (IP subnet) as your 
computer. The factory default IP address configuration of the Cisco 
WAP131 is DHCP. Make sure that your DHCP server is running and 
can be reached.

See 

 for troubleshooting information, or if 

you do not have a DHCP server. 

Locate the IP address of the Cisco WAP131.

a.

The Cisco WAP131 can be accessed and managed by Cisco 
network tools and services including the Cisco FindIT Network 
Discovery Utility that enables you to automatically discover all 
supported Cisco devices in the same local network segment 
as your computer. You can get a snapshot view of each device 
or launch the product configuration utility to view and configure 
the settings. For more information, see 

.

b. The Cisco WAP131 is Bonjour-enabled and automatically 

broadcasts its services and listens for services being 
advertised by other Bonjour-enabled devices. If you have a 
Bonjour-enabled browser, such as Microsoft Internet Explorer 
with a Bonjour plug-in, or the Apple Mac Safari browser, you 
can find the Cisco WAP131 on your local network without 
knowing its IP address.

You can download the complete Bonjour for Microsoft Internet 
Explorer browser from Apple’s website by visiting: 

c.

Locate the IP address assigned by your DHCP server by 
accessing your router or DHCP server. See your DHCP server 
instructions for more information. 

Launch a web browser, such as Microsoft Internet Explorer. 

In the address bar, enter the default DHCP address and press the 
Enter key.

Enter the default user name of cisco and password of cisco in the 
Username and Password fields.

Click Log In. The Wireless Access Point Setup Wizard appears.