Cisco Cisco WAP131 Wireless-N Dual Radio Access Point with PoE 설치 가이드
Cisco WAP131 Quick Start Guide
5
Verifying the Hardware Installation
To verify the hardware installation, complete the following tasks:
• Check the cable connections.
• Check the state of the indicator lights.
N
OTE
If you need help resolving a problem, visit the Cisco Support
Community at
.
Label
Activity
Description
POWER
Off
The Cisco WAP131 has no power.
Solid Green
The Cisco WAP131 is powered on, booting, or in
normal operation with DC power supply.
normal operation with DC power supply.
Solid Blue
The Cisco WAP131 is powered on, booting, or in
normal operation with PoE 802.at power supply.
normal operation with PoE 802.at power supply.
Solid Amber
The Cisco WAP131 is powered on, booting, or in
normal operation with PoE 802.af power supply.
normal operation with PoE 802.af power supply.
Solid Red
The Cisco WAP131 fails to boot with both
firmware images.
firmware images.
Flashing
(Green/Blue/
Amber)
(Green/Blue/
Amber)
The Cisco WAP131 is upgrading the firmware,
or is acquiring an IPv4 or IPv6 address.
or is acquiring an IPv4 or IPv6 address.
WLAN
Off
Wireless is disabled for both 2.4 GHz and 5 GHz.
Solid Green
Wireless is enabled in concurrent mode. (The
intensity needs to be the same.)
intensity needs to be the same.)
Solid Amber
Wireless is enabled with only 5 GHz in use.
Solid Blue
Wireless is enabled with only 2.4 GHz in use.
Flashing
Transmitting or receiving data.
LAN
Off
No Ethernet link.
Solid Green
Gigabit Ethernet link is active.
Solid Amber
Fast Ethernet link is active.
Flashing
Transmitting or receiving data.
5