Cisco Cisco WAP571 Wireless-AC N Premium Dual Radio Access Point with PoE 설치 가이드

Enter the default user name of cisco and password of cisco in the 
User Name and Password fields.

Click Login. The Wireless Access Point Setup Wizard appears.

Follow the Setup Wizard instructions to finish the WAP device 
installation. We strongly recommend that you use the Setup 
Wizard for the first installation.The Setup Wizard turns on the Wi-Fi 
radio, which allows you to connect wirelessly. For more advanced 
configurations, see the Administration Guide. A link to the 
Administration Guide is found in 

Congratulations, you can now start using your wireless access point.

Smart PoE is designed for detecting the power level from the PSE (Power 
Sourcing Equipment) side; it does not matter whether 802.3at or 802.3af 
mode, the WAP571 will operate at the appropriate mode automatically. 

Smart PoE ensures that the WAP571 remains functional once powered by 
802.3af PSE, and intelligently to adjust operations below:

• Second Ethernet port disabled

• 2.4-GHz 802.11n radio in 2x2:2 spatial-stream mode

• 5-GHz 802.11ac radio operates without restrictions

In case of an error while installing, try the following troubleshooting 
procedures described in this section:

If you cannot display the configuration utility, you can test the ability of the 
computer to communicate with the device by using ping. 

To use ping on a computer running Windows: