Cisco Cisco Aironet 1200 Access Point 릴리즈 노트
5
System Requirements
OL-2588-01
Installation Notes
Use Only One Power Option
You cannot provide redundant power to the access point with both DC power to its power port and inline
power from a patch panel or powered switch to the access point’s Ethernet port. If you apply power to
the access point from both sources, the switch or power patch panel might shut down the port to which
the access point is connected.
power from a patch panel or powered switch to the access point’s Ethernet port. If you apply power to
the access point from both sources, the switch or power patch panel might shut down the port to which
the access point is connected.
shows the power configuration that can shut down the port on the
patch panel or powered switch.
Figure 1
Improper Power Configuration Using Two Power Sources
Access Point Requires 1200 Series Universal Power Supply and Power Injector
You must use a 1200 series universal power supply to power the access point. If you need to use a power
injector to inject power into the access point’s Ethernet port, you must use a 1200 series power injector.
The 350 series universal power supply and power injector are not compatible with the 1200 series access
point.
injector to inject power into the access point’s Ethernet port, you must use a 1200 series power injector.
The 350 series universal power supply and power injector are not compatible with the 1200 series access
point.
System Requirements
You must have a 1200 series access point to install firmware version 11.41T.
Version Supported
Your access point must be running firmware version 11.40T or later to install firmware version 11.41T.
Universal
power supply
SYST
RPS
DUPLX
MODE
SPEED
UTIL
STAT
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
23
24
10Base-T / 10
0Base-TX
100Base-FX
Catalyst 2950
SERIES
Switch with
inline power or
power patch panel
Access point
74329