Brother RJ-2030 빠른 설정 가이드

Move the battery cover lock to the unlock position, and then open the 

battery cover.

Insert the battery into the battery compartment until the battery latch 

locks into place. Make sure that the terminal end of the battery is facing 

inwards and oriented correctly as shown.  Do NOT use excessive force 

to install the battery.

Close the battery cover, and then move the battery cover lock to the lock 

position.

Move the battery cover lock to the unlock position, and then open the 

battery cover.

While pushing the battery latch, remove the battery.

Close the battery cover, and then move the battery cover lock to the lock 

position.

Make sure that the rechargeable Li-ion battery is installed in your 

printer.

Use the compatible Brother AC adapter (PA-AD-600A) and AC power 

cord to connect your printer to an AC power outlet (see Recharging the 

Battery using the AC Adapter (Optional)), or use the Brother compatible 

car adapter to connect your printer to a DC power outlet (see 

Recharging the Battery using the Car Adapter (Optional)).

The LED indicator light is orange when the battery is charging.
When the rechargeable Li-ion battery is fully charged, the LED indicator 
turns off (when power is turned off) or lights in green (when power is 
turned on). Disconnect the AC adapter or car adapter from the battery’s 
DC connector.
For more information, see the User’s Guide.



Make sure that the rechargeable Li-ion battery is installed in your 

printer.

Open the interface cover and connect the AC adapter to your printer.

Connect the AC power cord to the AC adapter.

Connect the AC power cord to a nearby AC power outlet (100 -

 240 VAC, 50 - 60 Hz).



Connect your printer to your vehicle’s 12 V DC power outlet (cigarette lighter 

or similar) to charge the rechargeable battery.

Make sure that the rechargeable Li-ion battery is installed in your 

printer.

Connect the car adapter to the vehicle’s 12 V DC power outlet.

Open the interface cover and connect the car adapter to your printer.



The optional battery charger can also be used for charging the battery outside 

of the printer. For more information, see the operation manual that is included 

with the battery charger.

1

Battery latch

1

1

AC adapter

2

AC power cord

1

Car adapter

1

2

1