Eaton KIT-CABLRES-24 사용자 설명서

eaton corporation ePDU Industrial Products Catalog

Intelligent Power Control

  

IPC3600 Series

120V~ or 240V~,15A, 20A, 30A, Single Phase, 50/60 Hz

   

IPC36XX- Front 

 

SPECIFICATIONS

IPC3601

IPC3602

IPC3601-F3-3316

Approvals

CB, CE, UL/cUL Listed, FCC UL/cUL Listed, FCC

NA

Voltage Input/Output (50/60Hz)

100-240V~

120V~

200-240V~

Current Rating

16A

16A

24A

Full Load VA

1920 VA @ 120V~

3840 VA @ 240V~

1920 VA

5760 VA

Ethernet/Serial

YES

YES

YES

Outlets

IEC C13

NEMA 5-15R

IEC C13

Circuit Breaker

20A

20A

(2) 15/15A

EMI/RFI Filter

20A

20A

NO

Surge Suppression

YES

YES

YES

Power Input

C20 Inlet

C20 Inlet

Attached

Power Cable/Plug

Not Included

Not Included

10’ - L6-30P

•  1.72” (1U) x Depth 9.5” x Width 19.0”

•  Weighs approximately 12 lb.

•  Powder coated black steel

•   Detachable mounting brackets allow

for several mounting options

•  IPC3601 has 8 IEC 60320 type

 C13 (computer style) outlets

•  IPC3602 has 8 NEMA 5-15R

 (3 prong) outlets

•  Main power system on

•  Power “on” to outlets 1-8

•  2 Data and ethernet link

•  IEC 60320 Type C20 Inlet

•  Mating power cables must be

 ordered separately (page 18)

•  IPC3601 has a full range power

 supply for use at 100-240V

•  Common Mode - line to ground

•  Differential Mode - line to line

•  Filtered inlet isolates noise before

 entering the system

•  Refer to chart 4 on page 20

•  Line to Neutral (or Line)

•  Refer to chart 1 on page 20

•  Push button circuit breaker pops out  

 when an overload occurs

•  Push to reset

•  Serial RS232 via RJ22 connector on the

 rear. 6’ RJ22 to DB9 cable included

•  Serial baud rate is 9600 default or

 38,400 maximum

•  Ethernet (10/100) network via RJ45

 connector on the rear. 6’ network

 cable included

•  Network setup allows DHCP or any

 static public/private IP address

•  Web interface provides a graphic

 control interface through a Web

 browser (IE, Netscape, Mozilla)

•  Telnet interface provides a text menu  

 control interface with any terminal

 emulation software

•  SNMP allows read/write capability

 with trapping

•  E-mail notification system provides e-mail

 alerts or logs showing user activity

•  Serial interface provides a text menu  

 control interface with any terminal

 emulation software

•  FTP utility allows firmware upgrades

•  User name/password security

•  Settings allow the administrator to

 disable unused interfaces

•  Administrator and multiple users can  

 be configured

•  User level access can be limited to

 specific outlets

•  Unit and outlet names can be configured

•  Outlet groups can be created to

 perform an action on multiple outlets

•  Outlet control includes individual,

 group and all outlet global control

•  Outlet actions include on or off and reboot

•  Global sequence allows all the

 outlets to be turned on or off in a

 preset sequence up to 999 seconds

•  Outlet reboot automatically turns an outlet

 off and back on with one command at a

 preset time up to 999 seconds

•  E-mail notification allows up to two

 e-mail addresses to receive notifications

 of alerts or events

•  Administrator can configure on or off  

 events for outlets or groups. The event  

 occurs at the preset time daily or weekly.

CB