Eaton KIT-CABLRES-24 사용자 설명서

www.epdu.com 1.800.356.5794

CHASSIS

• 19” x 1.72” (1U) x 9.5”

• Weight approximately 12 lb.
• Detachable mounting brackets allow for
several mounting options

NEMA or IEC 320 OUTLETS

• IPC3401 has 8 IEC 60320 Type C13

– Rated by UL/CSA 125V~/15A

– Rated by UL/CSA/VDE 250V~/10A

• IPC3402 has 8 NEMA 5-15R

• IPC3402-A2 has 8 NEMA 5-20R

• IPC3402-2756 has 4 NEMA 5-20R and

4 NEMA 5-15R

• IPC3402-2930 has 8 NEMA 5-15R

(11) INDICATOR LIGHTS

• Main power to system-CB “on”

• Individual power “on” to outlets 1-8

• Data acquisition and remote disable

REMOTE or LOCAL CONTROL

• Serial RS232 port (DB9 Male) for direct

computer or modem connection

• RS485 input/output for strapping up to

10 systems together over CAT.5 cable

• Local: one on/off switch for each outlet

• -NET SYSTEMS ONLY: RJ45 for

network connections (Ethernet)

REMOTE DISABLE

• With the push of a button, disable

remote access to the IPC when needed

POWER SUPPLY

• The IPC3401 series features a full

range power supply for operation at

100-240 Vac input/output

BAUD RATE

• Default: 9600 baud

EMI/RFI FILTERING

• Common Mode - Line to Ground

• Differential Mode - Line to Line

• Filtered inlet isolates noise before

entering the system

• Refer to chart 3 on page 20

• IPC3402-2756 and IPC3402-2930

do not have filtering

SPIKE/SURGE SUPPRESSION (TVSS)

• Line to Line

• Refer to chart 1 on page 20

• Multi-stage, both MOVs and SAPs

BRANCH CIRCUIT PROTECTION

• UL498 Listed Main Disconnect Breaker

and guard, with a long time delay curve

provides manual on/off switching and

trips in an overload condition

POWER INPUT

• IEC 60320 Type C20 EMI/RFI Filtered Inlet

• Mating power cables must be ordered

separately (page 18)

• IPC3402-2756: attached 10’ cable and

NEMA L5-30P

OUTLET STATUS

• Query the IPC for Outlet and Watch Dog

status, i.e. outlets are “on” or “off”

STRAPPING

• Strapping allows up to 10 IPCs

(80 outlets) to be controlled at one address

• Units are connected together via the

RS485 “IN” and “OUT” connectors

UNIT NAME / PASSWORD

• The IPC comes with a default name

@@@@, which can be changed to

any four alphanumeric characters

• Optional 3 character password

MULTIPLE TIME DELAY (MTD)

• Sequence power up and power down to

outlets with a one second time delay

(factory set)

• User Programmable:

– Set power “on” sequence to any

combination of outlets

– Set the MTD

timing from 1 second

to 999 seconds, i.e. 009 = 9 seconds

AUTO-EVENT COMMAND RESPONSE

• The IPC will automatically update the status

of outlets (“on” or “off”) via serial or telnet

SOFTWARE CONTROLS

• Multi-platform compatible

• Control via Terminal Emulation Software

• Web interface for browser control

COMMANDS AVAILABLE

• All outlets on/off

• Specific outlets on/off

• Set up and sequence on/off all outlets

• Create password and unit address

• Outlet naming (8 characters)

• Set up, enable or disable Watchdog

• Display outlet and Watchdog Timer status

• Automatically receive update outlet

status whenever there’s a change

• Auto-reboot outlet 1 with a five-second

delay on restart

SPECIFICATIONS:

IPC3401

IPC3401-NET

IPC3402

IPC3402-NET

IPC3402-A2

IPC3402-A2-NET

IPC3402-2756

IPC3402-2930

Approvals

UL/cUL, CE, GS, FCC

UL/cUL, FCC

UL/cUL

Voltage (50/60Hz)

100-240V~

120V~

Current Input

20A @ 120V~
16A @ 240V~

20A

30A

Current Output

16A

24A

Full Load VA

1920 VA @ 120V~
3840 VA @ 240V~

1920 VA

2880 VA

Outlets (IEC or NEMA) Type C13

Type C13

5-15R

5-20R

(4) 5-20R, (4) 5-15R (8) 5-15R

Circuit Breaker

20/20A

20A

20/10A

EMI/RFI Filter

20A

N/A

Surge Suppression

270V

Power Input

Type C20 Inlet

L5-30P

Power Cord

Power cables must be ordered separately. Refer to page 18 for power cable options.

10/3AWG 10’

Ethernet Control

YES

Serial Control (RS232) YES

YES

Please refer to page 18 for power cable assemblies to match your country specific requirements.

Intelligent Power Control