Panasonic WJ-HD200 사용자 설명서

● IP Address (IP ADDR)

The default is "192.168.000.010".

● Netmask (NETMASK)

The default is "255.255.255.000".

● Gateway (GATEWAY)

The default is "192.168.000.001".

■ Switcher Setup (SWITCHER

SETUP)

Video switcher functions are programmed in this menu
setup.

● Start Display (START DISPLAY)

The image in the selected form will be displayed on the
monitor when the recorder is turned on.

Single image: CH 1 to CH 8
Quad image: QUAD-4A (including 1-4), QUAD-4B

(including 5-8)

Multi image: 9SCREEN (including 1-8)
Sequence: SPOT SEQ, MULTI SEQ

● Multiscreen Selection (MULTI SEL

MODE)

When pressing the [MULTI SCREEN SEL] button on the
front panel, the monitor display will change as follows
depending on the setup.

QUAD ONLY: QUAD-4A

→ QUAD-4B → QUAD-4A

ALL: QUAD-4A

→ QUAD-4B → 9SCREEN → QUAD-4A

● Sequence Setup (SEQUENCE

SETUP)

1. Move the cursor to SEQ SETUP in the SWITCHER

SETUP menu, and press the JogDial.
The SEQUENCE SETUP menu opens.

2. Select either MULTI SEQ SETUP or SPOT SEQ SETUP

with the [D] or [C] button, and press the JogDial. The
selected menu opens.

● Multiscreen Sequence Setup (MULTI

SEQ SETUP)

Open the QUAD SEQ SETUP menu to program the
sequence steps for displaying quad-split and single input
images.

1. Move the cursor to the desired step using the [D] or

[C] button.

2. Select a camera number with the JogDial, and press

the JogDial.
The default camera number is identical to the step num-
ber.

Available cameras: From 1 to 8 individually, 4A(1-4), or

4B(5-8)

Note: The recorder will skip any step assigned "–".

3. Select the duration for the step with the JogDial, and

press the JogDial.

Available durations: 2-30S

SWITCHER SETUP

START DISPLAY QUAD-4A
MULTI SEL MODE ALL

SEQUENCE SETUP

CAMERA VIEW SETUP

SEQUENCE SETUP

MULTI SEQ SETUP

SEQUENCE TIMING INT
AUTO SKIP ON

SPOT SEQ SETUP

SEQUENCE TIMING INT
AUTO SKIP ON

MULTI SEQ SETUP

STEP CAM SEC
1

→ QUAD-4A 2S

→ QUAD-4B 2S

→ - 2S