Panasonic WJ-HD200 사용자 설명서
42
OPERATING PROCEDURES
Controlling Video Inputs &
Monitors
Monitors
Operations on the front panel can control video inputs on
the spot monitor or multiscreen monitor.
the spot monitor or multiscreen monitor.
■ On the Spot Monitor
● Selecting the Spot Monitor
1. Press the [SPOT/MULTI] button to turn the LED in the
button on. The spot monitor is ready to be operated.
2. Follow the descriptions below for each monitoring mode
on the spot monitor.
● Viewing a Single Live Spot
A selected live image is displayed on the spot monitor until
a new input selection is made.
a new input selection is made.
1. Press any numeric button from 1 - 8.
The selected image appears on the monitor.
2. Press another numeric button to select a new input.
■ On the Multiscreen Monitor
● Selecting the Multiscreen Monitor
1. Press the [SPOT/MULTI] button to turn the LED in the
button off. The multiscreen monitor is ready to be oper-
ated.
ated.
2. Follow the descriptions below for each monitoring mode
on the multiscreen monitor.
● Viewing a Single Live
The multiscreen monitor can display a single live spot
image.
Operating procedures are the same as for "On the Spot
Monitor" except for selecting the multiscreen monitor.
In this condition, the spot monitor will display the same
image as the multiscreen monitor.
image.
Operating procedures are the same as for "On the Spot
Monitor" except for selecting the multiscreen monitor.
In this condition, the spot monitor will display the same
image as the multiscreen monitor.
● Zooming a Single Live
A single live or playback image on the multiscreen monitor
can be zoomed.
can be zoomed.
1. Display the desired single live or playback image on
the multiscreen monitor pressing the [ZOOM] button an
appropriate number of times.
appropriate number of times.
2. Hold down the [ZOOM] button for 2 seconds to enlarge
the image.
SPOT
MULTI
MULTI
CAMERA SELECT
1
5
2
6
3
7
4
8
SPOT
MULTI
MULTI
MULTISCREEN
SELECT
ZOOM
MULTISCREEN
SELECT
ZOOM