Troy-Bilt series 650 사용자 설명서

To prevent personal injury or property 

damage, do not start the engine until all assembly 

steps are complete and you have read and 

understand the safety and operating instructions in 

this manual.

5

• 

⁄16” open-end wrench

Block of wood (to support tiller when removing wheels)

• 

Tire pressure gauge

• 

Clean oil funnel

• 

Motor oil. Refer to the Engine Operator’s Manual for oil 

• 

specifications and quantity required.

NOTE: While unpacking, do not severely bend any of the control 

cables.

The tiller is heavy, do not attempt to remove it from 

1. 

the shipping platform until instructed to do so in these 

Assembly steps. 
Remove any packaging material from the carton. Remove 

2. 

any staples from the bottom of the carton and remove the 

carton from the shipping platform.
Remove all unassembled parts from the carton. Check 

3. 

that you have the items listed in the Contents of Carton list 

(contact your local dealer or the factory if items are missing 

or damaged). 

NOTE: All references to the right or left side of the tiller are from 

the operators positon.

Loosely attach the legs of the handlebar support to the inner 

1. 

sides of the tiller frame. Using two 5⁄16”-18 x 3⁄4” hex head 

screws and 5⁄16”-18 hex locknuts attach the handle through 

the hole in the frame closest to the engine. See Fig. 3-1.

One Tiller 

• 

One 20 oz. Bottle SAE 10W30 Oil

• 

One Handlebar Assembly

• 

One Operator’s Manual

• 

One Engine Operator’s Manual

•