Kurzweil pcx1inst 사용자 설명서

The PCX-1 board fits into the access opening at the bottom of the keyboard, so the first step is to 
remove the panel.

1. Make sure that the PC2 is disconnected from its power supply, and that you’ve discharged 

any residual static electricity by touching a conductive object (like the metal casing of the 
PC2 itself).

2. Position the foam pads on your work surface so that they’ll support the ends of the 

keyboard.

3. Place the PC2 face-down on the foam pads, with the keyboard facing away from you. 

Make sure that the PC2 is not resting on the Alpha Wheel or sliders.

4. Using a #1 Phillips screwdriver, remove the seven screws that secure the access panel, as 

5. Remove the access panel by lifting its far edge and pulling it up and away from you.