Zebra 49834 사용자 설명서

Miscellaneous Print Engine Problems

57518L-001 Rev. A

3/18/05

170PAX4 Maintenance Manual

113

 identifies miscellaneous problems with the print engine, the possible causes, and the 

recommended solutions.

The LCD is 
displaying a language 
that I cannot read. 

The language parameter was 
changed through the front 
panel or a ZPL command.

Press SETUP/EXIT to enter configuration 
mode.

Press the left oval. 

The print engine displays the 

LANGUAGE

 

parameter in the current language. Even if 
you cannot recognize the characters 
displayed, you can still scroll to another 
language.

Press the left or right oval to scroll through 
the choices.

Press SETUP/EXIT.

The LCD displays 

SAVE CHANGES

 in the 

original language.

Press NEXT to exit configuration mode and 
save the changes (if the language does not 
change, you may need to scroll to a different 
save option by pressing the left or right oval 
in the previous step).

Repeat this process, if necessary, until you 
reach the desired language.

Darkness setting too high.

Reduce the darkness setting. 

Clean the printhead thoroughly.

Ribbon core is not standard 
size and is slipping on the 
spindle.

Replace ribbon with one that has a standard core 
size.

The LCD may need replacing.

Run the 

check that LCD display shows all characters. If 
not, replace LCD.