Zebra 49834 사용자 설명서
250
170PAX4 Maintenance Manual
57518L-001 Rev. A
3/18/05
Preventive and Corrective Maintenance
Printed Circuit Boards—Wireless PCMCIA Option Board
Install the Wireless PCMCIA Board
1.
. To attach the PCMCIA board to the MLB, align the two connectors,
supporting both boards under the connectors, and gently press the two connectors together
until fully seated.
until fully seated.
Figure 133 • Wireless PCMCIA Option Board Components
2.
Reinstall the two hex screws, spacers, and nuts to secure the PCMCIA board to the main
logic board.
logic board.
3.
. Reattach the main logic board and the new wireless
PCMCIA board to the PCB access panel by reinstalling two of the hex screws, spacers,
and nuts. Snug the screws, but do not tighten at this time.
and nuts. Snug the screws, but do not tighten at this time.
4.
. Install the longer hex screw and two spacers that separate the
PCB access panel and the PCMCIA board. Snug the screw, but do not tighten at this time.
5.
. Install the screws, studs, and washers for the parallel
interface and serial interface connectors and tighten.
6.
Tighten the three hex screws that secure the boards to the PCB access panel.
7.
. Reattach the applicator interface board to the PCB access
panel.
8.
Refer to
and reinstall the PCB access panel.
Caution • Observe proper electrostatic safety precautions when handling any
static-sensitive components such as circuit boards and printheads.
static-sensitive components such as circuit boards and printheads.
Compact Flash
Socket
PCMCIA
Socket
Card
Eject
Button
Main Logic Board
Connectors