Zebra 49834 사용자 설명서
252
170PAX4 Maintenance Manual
57518L-001 Rev. A
3/18/05
Preventive and Corrective Maintenance
Printed Circuit Boards—ZebraNet 10/100 Print Server
ZebraNet 10/100 Print Server
This procedure is for installing or replacing the ZebraNet 10/100 Print Server. Read these
instructions thoroughly before performing this procedure.
instructions thoroughly before performing this procedure.
Tools Required
Installation Instructions
1.
Refer to
and remove the print engine from the applicator.
Install ZebraNet 10/100 Print Server
1.
Remove the two mounting screws securing the blank cover plate.
Caution • Turn OFF (O) the printer and disconnect it from the power source before
performing the following maintenance.
performing the following maintenance.
Caution • Observe proper electrostatic safety precautions when handling any
static-sensitive components such as circuit boards and printheads.
static-sensitive components such as circuit boards and printheads.
Caution • A qualified service technician must perform this installation.
Phillips Screwdriver Set
Metric Hex Key (Allen Wrench) Set
Anti-Static Wrist Strap
Anti-Static Wrist Mat