Zebra 49834 사용자 설명서
![Zebra](https://files.manualsbrain.com/attachments/370d33c5dccf4cbdafc4881e363a6131d0861050/common/fit/150/50/e7d75c7848000e06856e522e5c94f23978c9f534cefa079a90db3344b328/brand_logo.jpeg)
Preventive and Corrective Maintenance
Printed Circuit Boards—Wireless PCMCIA Option Board
57518L-001 Rev. A
3/18/05
170PAX4 Maintenance Manual
251
Resume Operation
1.
Refer to
to close the print engine and reinstall it into the
applicator.
2.
. Insert the wireless PCMCIA card into the card slot in the
back of the print engine.
3.
Install the clear plastic PCMCIA cover using the cover shield mounting screw.
4.
Reconnect the AC power cord and interface cables.
5.
Turn On (l) the print engine.
Refer to the Wireless Print Server User Guide (PN 13422L-001) to configure and verify proper
operation of the wireless PCMCIA card.
operation of the wireless PCMCIA card.
Important •
Do not connect the power cord and interface cables or turn On (l) the print
engine at this time.
Note •
For the right-hand PAX printers, install the PCMCIA card with the product label
facing to the left. The L-shaped notch will be facing down.
Note •
For the left-hand PAX print engine, install the PCMCIA card with the product label
facing to the right. The L-shaped notch will be facing up.
Note •
If the wireless PCMCIA board is not installed properly, the wireless link status
indicator does not appear at the bottom left of the front panel LCD.
Note •
If the wireless PCMCIA card is not installed or operating properly, the wireless
link status indicator will appear as an underscore at the bottom left of the front panel LCD.