ge-interlogix simon 3 사용자 설명서
Simon Security System
21
Option 02: Panel Voice (Default = On)
Determines whether the panel announces all status, alarm, and program mode messages
(on), or only announces messages for canceled alarms, open sensors (protesting), when
SYSTEM STATUS is pressed, or if the panel is in program mode (off).
(on), or only announces messages for canceled alarms, open sensors (protesting), when
SYSTEM STATUS is pressed, or if the panel is in program mode (off).
¾
To turn on Panel Voice, press:
Add—Option #—02—DONE.
¾
To turn off Panel Voice, press:
Delete—Option #—02—DONE.
Option 03: Latchkey (Default = Off)
Determines whether the panel reports a Latchkey alarm if the system is not disarmed at
a preset time between midnight and 11:59
a preset time between midnight and 11:59
P
.
M
. (on). If the Latchkey feature is disabled
(off), the panel will not report a Latchkey alarm.
Note
The system clock must be
set for the Latchkey feature
to work.
The system clock must be
set for the Latchkey feature
to work.
¾
To set Latchkey, press:
Add—Option #—03—Hours—Minutes—DONE.
¾
To turn off Latchkey, press:
Delete—Option #—03—DONE.
Option 04: Primary Phone Number (Default = none)
Lets you program up to a 26-digit central monitoring station receiver phone number for
monitored systems (on), or delete an existing primary phone number (off).
monitored systems (on), or delete an existing primary phone number (off).
Press Test for each required pause, Add for a *, and Delete for a # (each of which uses
one of the 26 available places).
one of the 26 available places).
¾
To set Primary Phone Number, press:
Add—Option #—04—Up to 26 digits—DONE.
Note
Pressing DONE is required if
you enter fewer than 26 dig-
its. The phone number is
automatically stored without
pressing DONE if all 26
places are used.
Pressing DONE is required if
you enter fewer than 26 dig-
its. The phone number is
automatically stored without
pressing DONE if all 26
places are used.
¾
To delete Primary Phone Number, press:
Delete—Option #—04—DONE.
Option 05: Secondary Phone Number (Default = none)
Lets you program up to a 26-digit central monitoring station receiver/numeric pager/
voice event notification phone number for monitored systems (on), or delete an existing
secondary phone number (off).
voice event notification phone number for monitored systems (on), or delete an existing
secondary phone number (off).
Press Test for each required pause, Add for a *, and Delete for a # (each of which uses
one of the 26 available places).
one of the 26 available places).
Note
For numeric pagers, add 2 pauses at the end of the number. Some pagers may require 3 or 4
additional pauses to work correctly. Pagers that require the panel to dial more than 26 digits
will not work. The panel calls a numeric pager twice for each report. Silent alarms report to a
pager as an intrusion alarm. See the Table “Pager Reporting Messages” for more reporting
information.
For numeric pagers, add 2 pauses at the end of the number. Some pagers may require 3 or 4
additional pauses to work correctly. Pagers that require the panel to dial more than 26 digits
will not work. The panel calls a numeric pager twice for each report. Silent alarms report to a
pager as an intrusion alarm. See the Table “Pager Reporting Messages” for more reporting
information.
Note
Pressing DONE is required if
you enter fewer than 26 dig-
its. The phone number is
automatically stored without
pressing DONE if all 26
places are used.
Pressing DONE is required if
you enter fewer than 26 dig-
its. The phone number is
automatically stored without
pressing DONE if all 26
places are used.
¾
To set Secondary Phone Number, press:
Add—Option #—05—Up to 26 digits—DONE.
¾
To delete Secondary Phone Number, press:
Delete—Option #—05—DONE.
Option 06: Downloader Phone Number (Default = none)
Lets you program up to a 26-digit phone number for a computer modem for using Tool-
Box Downloader (on), or delete an existing phone number (off).
Box Downloader (on), or delete an existing phone number (off).
Press Test for each required pause, Add for a *, and Delete for a # (each of which uses
one of the 26 available places).
one of the 26 available places).