ge-interlogix simon 3 사용자 설명서
Simon Security System
28
Note
When this feature is on, the
system must be disarmed
before entering the pre-
mises, since it is disabling
the Entry Delay. If Option 58:
Remote Touchpad Arming is
on, keychain touchpads can-
not disarm the system and
will cause an alarm upon
entering.
When this feature is on, the
system must be disarmed
before entering the pre-
mises, since it is disabling
the Entry Delay. If Option 58:
Remote Touchpad Arming is
on, keychain touchpads can-
not disarm the system and
will cause an alarm upon
entering.
¾
To turn on No Delay from Keychain Touchpad, press:
Add—Option #—28—DONE.
¾
To turn off No Delay from Keychain Touchpad, press:
Delete—Option #—28—DONE.
Option 29: Panel Piezo Alarms (Default = on)
Determines whether the panel piezo emits alarm sounds (on) or not (off).
Note
For UL listed systems where
this option is off, at least one
UL listed external audible
signal device must be used
and Option 53: Hardwire
Siren Supervision must be
on.
For UL listed systems where
this option is off, at least one
UL listed external audible
signal device must be used
and Option 53: Hardwire
Siren Supervision must be
on.
¾
To turn on Panel Piezo Alarms, press:
Add—Option #—29—DONE.
¾
To turn off Panel Piezo Alarms, press:
Delete—Option #—29—DONE.
Option 30: Panel Panic Alarms (Default = on)
Determines whether the panel panic buttons (police, auxiliary, and fire) activate alarms
when pressed (on), or not (off).
when pressed (on), or not (off).
¾
To turn on Panel Panic Alarms, press:
Add—Option #—30—DONE.
¾
To turn off Panel Panic Alarms, press:
Delete—Option #—30—DONE.
Option 31: Downloader Enable (Default = on)
Determines whether the panel can be accessed using ToolBox (on), or not (off).
¾
To turn on Downloader Enable, press:
Add—Option #—31—DONE.
¾
To turn off Downloader Enable, press:
Delete—Option #—31—DONE.
Option 32: 300 Baud (Default = on)
Determines whether the baud rate used by the panel for central station or ToolBox
communication is 300 bps (on) or 110 bps (off).
communication is 300 bps (on) or 110 bps (off).
¾
To turn on 300 Baud, press:
Add—Option #—32—DONE.
¾
To turn off 300 Baud, press:
Delete—Option #—32—DONE.
Option 33: Audio Verification (Default = off)
Note
For this option to work cor-
rectly, the panel must have a
2-way voice microphone or
an Interrogator 200 Audio
Voice Module attached.
For this option to work cor-
rectly, the panel must have a
2-way voice microphone or
an Interrogator 200 Audio
Voice Module attached.
Determines whether the system can perform 2-way voice audio sessions with a central
station operator (on), or not (off).
station operator (on), or not (off).
Note
Panel voice announcements are silenced during audio sessions. If the operator does not ter-
minate the session correctly, panel announcements may not occur for up to 90 seconds after
the operator hangs up. If this option is off, Option 47: AVM Mode and Option 48: Panic
Talk—AVM will not work.
Panel voice announcements are silenced during audio sessions. If the operator does not ter-
minate the session correctly, panel announcements may not occur for up to 90 seconds after
the operator hangs up. If this option is off, Option 47: AVM Mode and Option 48: Panic
Talk—AVM will not work.
¾
To turn on Audio Verification, press:
Add—Option #—33—DONE.
¾
To turn off Audio Verification, press: