ge-interlogix simon 3 사용자 설명서
Simon Security System
27
Delete—Option #—25—DONE.
Option 26: Fail to Communicate (Default = on)
Determines whether the panel and interior sirens sound trouble beeps if it is unable to
successfully send a report to a central station or pager (on), or not (off).
successfully send a report to a central station or pager (on), or not (off).
Note
For UL listed systems, Fail
to Communicate must be on.
For UL listed systems, Fail
to Communicate must be on.
¾
To turn on Fail to Communicate, press:
Add—Option #—26—DONE.
¾
To turn off Fail to Communicate, press:
Delete—Option #—26—DONE.
Option 27: Ring/Hang/Ring (Default = 1)
Determines when the panel answers a remote phone access or Toolbox call. Depending
on whether an answering machine exists at the panel location, off-site access to the
panel can be done with a series of phone calls or just one.
on whether an answering machine exists at the panel location, off-site access to the
panel can be done with a series of phone calls or just one.
The following table shows the available settings.
For off-site access where an answering machine does not exist, the user or ToolBox
operator simply calls the panel location once and listens for 10 rings. The panel should
answer after the tenth ring.
operator simply calls the panel location once and listens for 10 rings. The panel should
answer after the tenth ring.
For off-site access where an answering machine exists, the user or ToolBox operator
must perform the following steps:
must perform the following steps:
1.
Call the panel location.
2.
Let the phone ring once, then hang up.
3.
Wait at least 10 seconds but not more than 40, then call the panel location again.
The panel should answer on the first ring.
The panel should answer on the first ring.
If set to 1 or 5, perform steps 1 - 3 once.
If set to 2 or 6, perform steps 1 - 3 twice.
If set to 3 or 7, perform steps 1 - 3 three times.
¾
To turn on Ring/Hang/Ring, press:
Add—Option #—27—1, 2, 3, 4, 5, 6 or 7—DONE.
¾
To turn off Ring/Hang/Ring (disable remote access), press:
Delete—Option #—27—DONE.
Option 28: No Delay from Keychain Touchpad (Default = off)
Determines whether a keychain touchpad arms the system with no delay (on) or not
(off).
(off).
Ring/Hang/Ring Settings
Setting
Control Panel answers after:
1
ring/hang/ring or 10 rings
2
ring/hang/ring/hang/ring or 10 rings
3
ring/hang/ring/hang/ring/hang/ring or 10 rings
4
10 rings
5
ring/hang/ring
6
ring/hang/ring/hang/ring
7
ring/hang/ring/hang/ring/hang/ring
Off
Disabled—no remote (off-site) access