Panasonic DPMB300EU 작동 가이드
6. Copier
36
6 Copier
Copy
6.1 Making a copy
6.1.1 Using the scanner glass
1
If the {
D} light is OFF, turn it ON by pressing {D}.
2
Set the original (page 20).
3
If necessary, change the resolution and contrast
according to the type of document.
according to the type of document.
L
To select the resolution, see page 36.
L
To select the contrast, see page 36.
4
If necessary, enter the number of copies (up to 99).
5
{
X}
L
If the copy input tray prompt (feature #471 on
page 63) is activated, select the desired
recording paper size by pressing {V} or {^}
repeatedly, then press {
page 63) is activated, select the desired
recording paper size by pressing {V} or {^}
repeatedly, then press {
X} again.
L
The unit will start copying.
6
After you finish copying, press {
W} to reset the
Note:
L
To stop copying, see page 74.
L
You can change the default operation mode (feature
#463 on page 57) and the timer before returning to
the default operation mode (feature #464 on page
57).
#463 on page 57) and the timer before returning to
the default operation mode (feature #464 on page
57).
L
If the {
V/K} light is ON, the unit can receive faxes
automatically even when in the copy mode.
To select the resolution
1. Press {
G}/{H} repeatedly.
–
“
TEXT/PHOTO”: For both text and photographs.
–
“
TEXT”: For text only.
–
“
PHOTO”: For photographs, shaded drawings,
etc.
2. {OK}
Note:
L
You can change the default resolution (feature #461
on page 63).
on page 63).
To select the contrast
Adjust this setting depending on the darkness or
lightness of the document. 5 levels (low to high) are
available.
Press {
Adjust this setting depending on the darkness or
lightness of the document. 5 levels (low to high) are
available.
Press {
F} repeatedly. i {OK}
Note:
L
You can hold the previous contrast setting (feature
#462 on page 57).
#462 on page 57).
{
OK}{V}{^}
{
D} (Copy)
{
F} (Contrast)
{
G}/{H} (Resolution)
{
V/K} (Fax Auto Answer)
{
W} (Stop)
{
X} (Start)