BMI Technologies Inc. RFVI 사용자 설명서
DRAFT G FORCE PLUS RF Instruction Manual
Doc #RF1 Rev.9
77
Apr/08
DATA FIELD DEFINITIONS
This section explains the settings that must be established in the Software. It is divided by major category:
System Settings, Authorization Groups, Vehicles, and Employees. Settings are listed in the order they appear
in the Software.
System Settings
System Settings apply to all Vehicles in a fleet, and changes require all Vehicles to be reprogrammed with
the Data Logger.
Card Expiration Warning (days)
The Vehicle Interface displays “CARD EXPIRY SOON” with
the “LOGIN APPROVED” message when a Card’s Expiry
Date or (enforced) Recertification Date is within this period of
time.
the “LOGIN APPROVED” message when a Card’s Expiry
Date or (enforced) Recertification Date is within this period of
time.
Vehicle Inspection Frequency
Choose one of five options for Vehicle Inspections:
1) Every Login
2) Every Operator Change
3) First Login Per Operator Per Interval (i.e. shift)
4) First Login Per Interval (i.e. shift)
5) No Vehicle Inspection
2) Every Operator Change
3) First Login Per Operator Per Interval (i.e. shift)
4) First Login Per Interval (i.e. shift)
5) No Vehicle Inspection
Vehicle Inspection Interval (hours)
When items 3) or 4) are selected for the Vehicle Inspection
Frequency, enter the shift length (i.e. 8, 12, or 24 hours).
Frequency, enter the shift length (i.e. 8, 12, or 24 hours).
Vehicle Inspection Inactivity Timer
(seconds)
(seconds)
The Vehicle reverts to Operator Login (Vehicle Interface
displays “OPERATOR LOGIN PRESENT CARD”) when
there is no key-press within this period of time during the
Vehicle Inspection.
displays “OPERATOR LOGIN PRESENT CARD”) when
there is no key-press within this period of time during the
Vehicle Inspection.
Preventative Maintenance Due
Warning (hours)
Warning (hours)
The Vehicle Interface displays “PM DUE SOON” when a
Vehicle’s scheduled Preventative Maintenance is within this
period of time. After the Preventative Maintenance is due, the
Vehicle Interface displays “PM DUE NOW”.
Vehicle’s scheduled Preventative Maintenance is within this
period of time. After the Preventative Maintenance is due, the
Vehicle Interface displays “PM DUE NOW”.
PM Automatic Maintenance Lockout
on Past Due (if checked)
on Past Due (if checked)
The Vehicle enters Maintenance Lockout (Vehicle Interface
displays “MAINTENANCE LOCKOUT”) at the next key-on
after scheduled Preventative Maintenance is due.
displays “MAINTENANCE LOCKOUT”) at the next key-on
after scheduled Preventative Maintenance is due.
Horn Patterns (On/Off)
Set unique horn patterns for each Vehicle state. An unchecked
field indicates no horn will sound for the state. A value of 1 = ¼
second, therefore when On=2 and Off=1200, the horn sounds for
½ second every 5 minutes in that state.
field indicates no horn will sound for the state. A value of 1 = ¼
second, therefore when On=2 and Off=1200, the horn sounds for
½ second every 5 minutes in that state.
Battery High Fault Threshold (SGP)
The Vehicle enters Battery Fault when a battery has a sustained
level above this specific gravity point threshold. The Vehicle
Interface displays “BATTERY FAULT OVER/UNDER
VOLT.” and the red Battery Fault LED illuminates. Other
interrupts and alarms will exhibit as programmed. To begin
clearing this condition, the Vehicle must be placed into
Maintenance Lockout. See “RECOMMENDED SETTINGS”.
level above this specific gravity point threshold. The Vehicle
Interface displays “BATTERY FAULT OVER/UNDER
VOLT.” and the red Battery Fault LED illuminates. Other
interrupts and alarms will exhibit as programmed. To begin
clearing this condition, the Vehicle must be placed into
Maintenance Lockout. See “RECOMMENDED SETTINGS”.