BMI Technologies Inc. RFVI 사용자 설명서
G FORCE PLUS RF Instruction Manual
Apr/08
80
Doc #RF1 Rev.9
Battery Must Charge Delay (minutes)
There is a delay for the defined number of minutes before the
Lift Interrupt and Secondary Alarm circuits open after Battery
Must Charge is detected.
Lift Interrupt and Secondary Alarm circuits open after Battery
Must Charge is detected.
Battery Fault Lift Interrupt (if
checked)
checked)
The circuit wired to interrupt the Vehicle lift opens when
Battery Fault is detected (lift interrupt created).
Battery Fault is detected (lift interrupt created).
Battery Fault Secondary Alarm (if
checked)
checked)
The circuit wired to create a secondary alarm opens when
Battery Fault is detected.
Battery Fault is detected.
Battery Fault Delay (minutes)
There is a delay for the defined number of minutes before the
Lift Interrupt and Secondary Alarm circuits open after Battery
Fault is detected.
Lift Interrupt and Secondary Alarm circuits open after Battery
Fault is detected.
Vehicle Defaults Tab
RECOMMENDED BUT NOT MANDATORY
Battery Nominal Voltage
Set the default nominal battery voltage for Vehicles in this
Authorization Group. Editable in Vehicle settings.
Authorization Group. Editable in Vehicle settings.
Impact Hard Threshold (G)
Set the default upper limit for Vehicles in the Authorization
Group for determination of hard Impacts. Editable in Vehicle
settings.
Group for determination of hard Impacts. Editable in Vehicle
settings.
Impact Hard Samples
Set the default number of samples for Vehicles in the
Authorization Group for determination of hard Impacts.
Editable in Vehicle settings.
Authorization Group for determination of hard Impacts.
Editable in Vehicle settings.
Impact Soft Threshold (G)
Set the default upper limit for Vehicles in the Authorization
Group for determination of soft Impacts. Editable in Vehicle
settings.
Group for determination of soft Impacts. Editable in Vehicle
settings.
Impact Soft Samples
Set the default number of samples for Vehicles in the
Authorization Group for determination of soft Impacts.
Editable in Vehicle settings.
Authorization Group for determination of soft Impacts.
Editable in Vehicle settings.
Vehicles
The Vehicle settings are specific to a Vehicle, and changes require the Vehicle to be reprogrammed with
the Data Logger.
Gray fields are read-only; they cannot be edited.
General Tab
Vehicle ID
A system-assigned vehicle identifier for reference only.
Vehicle No
Enter the company-assigned vehicle identifier (i.e. Unit No).
Serial No
Enter the OEM serial number.
Description
Enter the Vehicle description (i.e. make, model, year
purchased).
purchased).
Authorization Group
Click the [Link To…] button to select the Authorization
Group the Vehicle belongs to.
Group the Vehicle belongs to.
Authorization Desc.
Description of the Authorization Group the Vehicle belongs
to.
to.
Rental (if checked)
Indicates the Vehicle is a rental. For reference only.