RadioFrame Networks Inc MCSERIESHP10 사용자 설명서

Installation  

MC-Series High-Power System 

  

998--01 

Rev 

X1 

48 

RadioFrame Networks, Inc. 

 

TRADE SECRET INFORMATION 

•  RF (Tx / Rx / Rx diversity) 
• Power 

Figure 29  Top of the Rack (TOR), Dual-Band Bulkhead, Cabling and Equipment 

 

4.5.1  Grounding 

1  Ground the cabinet ground bar to the site according to Sprint Nextel’s installation 

instructions using 2-hole terminal lug. Type is Panduit 2-hole, P/N LCD6-14A, or 
equivalent. Required crimp tool is CT-1700. 

2  Connect the site ground to the ground at the top of the rack according to Sprint 

Nextel’s installation procedures (see Figure 29 for ground location at the top of the 
rack). 

4.5.2  T1 

1  Follow Sprint Nextel procedure for routing the site T1 cable through the top of the 

cabinet as shown in Figure 29. 

2  Connect the T1 cable to the CSU according to Sprint Nextel’s installation 

instructions. 

4.5.3  GPS Surge Arrestor 

Follow Sprint Nextel’s procedure for installing GPS equipment at the site. Then complete 
the following procedure: 

3  Install the two RFN-provided GPS surge arrestors at the top of the rack (Figure 29).