Microsoft Corporation CU-13R 사용자 설명서
I n s t a l l a t i o n
37
You can connect the car kit to a speaker with an impedance of at least 4
ohms. If the impedance is over 8 ohms, the output power is significantly
lower than normal. With car specific wiring adapters, you can connect
the car kit to the vehicle without any modification to the existing
wiring. For availability, consult your service technician.
ohms. If the impedance is over 8 ohms, the output power is significantly
lower than normal. With car specific wiring adapters, you can connect
the car kit to the vehicle without any modification to the existing
wiring. For availability, consult your service technician.
Installation using the ISO cable CA-160
When you connect the car kit to the car radio system with the ISO cable
CA-160, the car radio is muted when you make or receive a call.
CA-160, the car radio is muted when you make or receive a call.
1. To connect the ISO cable to the car radio:
• Disconnect the two ISO plugs from the car radio for power and
loudspeakers.
CA-160
CK-200