Karlnet Inc. KS-CPO010124B 사용자 설명서
525 Metro Place North, Suite 100
Dublin, OH 43017
Dublin, OH 43017
KarlNet
Office: 614-822-5275
Fax: 614-822-0024
www.karlnet.com
Fax: 614-822-0024
www.karlnet.com
INSTALLATION
Follow the steps below to install your KarlNet CPE Outdoor wireless device:
1.
2.
3.
4.
Each step is described in more detail below.
Mount the Unit
Each SSU or CSU unit ships with a mounting bracket and associated hardware that can
be used to mount the unit on a pole. The bracket should be used on poles that support
standard U-mounts (2.5” in diameter). You can use other mounting brackets at your own
discretion.
General Mounting Considerations
Mount the SSU or CSU to a secured pole in the shade, with unobstructed line of
sight to the Wireless Base Station (WBS).
Stainless steel hose-clamps, or any suitable equivalent, may be used to secure the
unit to the mast.
Leave the unit mounting loose enough to allow for movement when performing
the alignment/testing procedure. The unit should be tightened only after the
alignment/testing procedure is completed.
alignment/testing procedure is completed.
Power up the Unit
Power for the SSU/CSU is provided either through a Teletronics PoE Injector (or another
approved PoE injector) or through a Jameco 14V DC power wall-wart (or another
approved DC power supply). The SSU/CSU ships with both a PoE injector and DC
power supply.
approved PoE injector) or through a Jameco 14V DC power wall-wart (or another
approved DC power supply). The SSU/CSU ships with both a PoE injector and DC
power supply.
9