Controlled Electronic Management Systems Ltd INFOPROX 사용자 설명서

InfoProx Entry   

Configuring the Door Control Unit 

A global identification number can be set or this option can be bypassed. GINs can 
be associated with Time Zones and are used to allow access with a single number 
sequence, such as 5678. The default GIN is 1234.  

 

To change the default, enter four new numbers when the prompt appears 
after the Door Close After Time screen 

 

Set GIN=1234 
New GIN=     

1. 

Enter four numbers. 

2. 

Wait for the confirmation beep. 

The screen changes to the next screen, Set Scode. 

3. 

Press # to skip the Set Scode setup for now.   

This returns you to the first Administration menu. 

4. 

Press 3 (Config). 

5. 

Press # repeatedly, bypassing setup screens until you return to the GIN 
setup screen. 

You should then see the new value. 

This new four-digit GIN can be associated with a Time Zone, if a PIN-Only 
Time Zone is selected. The GIN will operate the unit during the PIN-Only 
Time Zone until it is changed. To change the GIN again, repeat the 
procedure above. 

 

 

GINs are convenient in situations where temporary access 
to a building by a group of people who have been provided 
the GIN is desirable. For instance, GINS are useful in 
situations for access to a reunion at a condominium’s 
recreational facility that normally has secure access, or 
could be used to grant access to employees during an 
08:00 to 17:00 Time Zone.