Controlled Electronic Management Systems Ltd INFOPROX 사용자 설명서
Configuring the Door Control Unit
InfoProx Entry
Site Code
The manufacturer for each batch of cards embeds the site code. Usually, the user
requests site codes on a card order form. Batches of cards can also be issued
without site codes. As a rule, the manufacturer will provide this code to
administrators.
requests site codes on a card order form. Batches of cards can also be issued
without site codes. As a rule, the manufacturer will provide this code to
administrators.
The prompt appears after the GIN is entered, viewed, or bypassed on the previous
screen.
screen.
Set Scode=XXX
New Scode=XXX
New Scode=XXX
To identify cards used by cardholders, the reader requires a unique site code. If no
site code is entered, any card that is added will be valid and will enable access.
However, if a site code is entered, only those cards with the embedded code will
be valid and will enable access.
site code is entered, any card that is added will be valid and will enable access.
However, if a site code is entered, only those cards with the embedded code will
be valid and will enable access.
Entering a site code
1.
Enter the three-digit site code.
A tone confirms that the site code has been accepted.
2.
Press # to continue with unit setup or wait for the screen to time out.
You are returned to the first Administration menu.
Any cards entered prior to configuring a site code will
not be valid cards unless they contain the site code.
If no site code is entered or if 0 is entered, the LCD
displays –1, indicating that no site code is being
used.
not be valid cards unless they contain the site code.
If no site code is entered or if 0 is entered, the LCD
displays –1, indicating that no site code is being
used.
38
Software
House