Humax T9 사용자 설명서
DUT Graphical User Interface
DUT Tool Package
Overview of the DUT GUI
Confidential
User’s Guide
13
Revision 1.1, 2013-05-06
4
Overview of the DUT GUI
The DUT GUI provides the following functions:
4.1
DUT GUI Features
•
Change DUT operation to desired channel
•
Turn on/off Rx/Tx antennas
•
Receive 802.11a/b/g/n packets in nCB/CB Mode and at SISO/MIMO rates
•
Transmit 802.11a/b/g/n packets in nCB/CB Mode and at SISO/MIMO rates
•
Transmit in Open/Closed loop with Regulatory restrictions
•
Read and burn the EEPROM/Flash
•
Crystal frequency tuning tool
4.2
The Tab Bar
The DUT GUI includes five tabs:
•
•
Basic Operation - Includes all functions needed to control the receiving and transmission for the DUT
•
Extended operation - Includes calibration of the on-board Crystal and an option for future Antenna selection
•
EEPROM & Statistics - Includes all functions needed to read and write to the EEPROM along with some
advance options
advance options
•
TPC - Includes specific calibration data information represented in the EEPROM/Flash
•
INFO - Includes information about current system state, such as power-up self test results
Figure 5
DUT GUI Tabs
4.3
Log and Messages Pane
Figure 6
Log and Messages Pane
In the log pane, you can see the status of command execution. Problems are colored in red.