Nokia Solutions and Networks T5DK1 사용자 설명서

68P64115A19

–

4

Mar 2003

1X SC 4812T-MC BTS Hardware Installation - Software Release R2.16.1.x

2-37

The objective of this procedure is to install the BTS RX Port receive
path cabling. 120-degree sector receive path cabling is used for CDMA
systems.

The cable designations are referenced to Table 2-1 in the “Cabling
Diagrams and Description” area. Table 2-29 and Table 2-30 provide the
quantities and descriptions of the cables required for this procedure.

Table 2-29: Cables Needed for 120 Degree Sector Receive Path

G

(see Table 2-30)

CGDS2212602

15 ft. Jumper Cable, N/M–N/M.

Figure 2-17 shows RX antenna (Direct Connect) configuration.
Table 2-30 describes the antenna cable connection ports.

Table 2-30: Cable Run List for 120 Degree Sector Receive Path Cabling

6

RX 1A
RX 2A
RX 3A

6

RX 1B
RX 2B
RX 3B