Digital Security Controls Ltd. 09GS260L 사용자 설명서

22

The General System trouble is the sole trouble that will appear on the keypad LCD when encountered by a Communicator on the 
1616 / 1832 / 1864 panel.

The firmware upgrade default differs from a full default, in that it is not as comprehensive. The following sections do not default 
during a Firmware Upgrade Default:

• Ethernet IP Address
• Ethernet IP Subnet Mask
• Ethernet Gateway IP Address
• DLS Incoming Port
• DLS Outgoing Port

• If this option is enabled, the unit will not perform a flash update unless the unit is restarted with the hardware default jumper 

in place.

• The remote server will configure the TFTP settings in the device and will restart the unit.
• If this option is enabled, restarting the unit will not initiate a TFTP session. However, when the hardware default jumper is in 

place and the unit is restarted, the unit will initiate the TFTP session.

• The first reset after the TFTP session will ignore the hardware default jumper; subsequent resets with the hardware default 

will result in a hardware default taking place.

• At the end of the TFTP session the unit shall perform a Firmware Upgrade Default.

Loss of Time and Date

If power was lost completely (AC and battery), the 
time and date will need to be re-programmed. Press *.

Re-program Time and Date

Trouble Condition

Description

User Action