3M Company SSD8210 사용자 설명서
10
Starting the SelfCheck System
1
Press the power switch on the back of the system.
2
Log in using your designated password, if required. The system
automatically starts the 3M™ SelfCheck™ System program.
automatically starts the 3M™ SelfCheck™ System program.
Shutting down the SelfCheck System
You can shut down the SelfCheck system in any of several ways:
§ Press **316# on the onscreen administration keypad, wait for Windows
to shut down, and then turn off the power switch on the back of the
system.
system.
§ Place the SD command card in the RFID detection area. Wait for
Windows to shut down, and then turn off the power switch.
§ Using the keyboard, press Esc to end the SelfCheck system program.
Then, in the Microsoft® Windows® taskbar, click Start, click Shut Down,
and click OK. Wait for Windows to shut down, and then turn off the power
switch.
and click OK. Wait for Windows to shut down, and then turn off the power
switch.
Starting SelfCheck System Manager
SelfCheck System Manager is the SelfCheck system’s management and con-
figuration utility. Access to its features is password-controlled. Only adminis-
trators have complete access to its hardware and policy configuration options.
figuration utility. Access to its features is password-controlled. Only adminis-
trators have complete access to its hardware and policy configuration options.
To start SelfCheck System Manager
1
Choose one of the following options:
§ If the keyboard is not plugged into the SelfCheck system, start at step 2.
§ If the keyboard is already plugged in and the SelfCheck system is
running, start at step 6.
2
Shut down the SelfCheck system.
3
Turn off the power switch on the back of the SelfCheck system.
4
Plug the keyboard into the computer keyboard port.
5
Turn on the power switch on the back of the SelfCheck system.
§ Microsoft® Windows® starts, and then the SelfCheck system
program starts.
6
Press the Esc key on the keyboard anytime after the clock appears on
the SelfCheck system screen.
the SelfCheck system screen.
§ The Windows desktop appears.
7
On the Windows desktop, double-click the SelfCheck Manager icon.
§ SelfCheck System Manager starts.
8
Log in using your designated password.
SelfCheck System Manager icon