3M Company SSD8210 사용자 설명서
11
SelfCheck System Manager procedures
This section contains common procedures for configuring the 3M™
SelfCheck™ System through the SelfCheck System Manager.
SelfCheck™ System through the SelfCheck System Manager.
Operating modes
To put the SelfCheck system into different modes of operation, use the
Mode menu.
Mode menu.
To choose an operating mode
§ On the Mode menu, click the mode you want to put the SelfCheck
system into.
§ In all modes, press the Esc key to return to the SelfCheck System
Manager.
Mode menu
SelfCheck mode
Click SelfCheck to start the SelfCheck System program while leaving the
SelfCheck System Manager active. Use SelfCheck mode to observe
changes to the SelfCheck program while making changes to the
configuration.
SelfCheck System Manager active. Use SelfCheck mode to observe
changes to the SelfCheck program while making changes to the
configuration.
Out of Service mode
Click Out of Service to display the out-of-service graphic on the SelfCheck
system screen.
system screen.
Demonstration mode
Click Demonstration to put the SelfCheck system into demonstration mode.
This mode allows checkout of items for training or demonstration purposes.
While in the demonstration mode, the SelfCheck system uses an internal
database and does not communicate with any external system.
This mode allows checkout of items for training or demonstration purposes.
While in the demonstration mode, the SelfCheck system uses an internal
database and does not communicate with any external system.
The demonstration database can be configured using the Demo Database
Manager, described in the appendix to the SelfCheck System Model 8210
Administrator’s Guide.
Manager, described in the appendix to the SelfCheck System Model 8210
Administrator’s Guide.