Uniden America Corporation UB315 사용자 설명서

The ID is locked out. You can 
Lockout up to 200 IDs.

Note: If you Lockout an ID in Search mode, it is also locked

out in Scan List mode.
Conversely, if you Lockout an ID while in Scan List
mode, it is locked out in Search mode. For information
about Scan Lists see page 55.

EDACS BLOCKOUT is a powerful form of 

ID  LOCKOUT

that can be used only with AFS and
EDACS systems. This feature lets you
lockout entire Agencies or Fleets, not just
individual talkgroups. Using 

ID

BLOCKOUT

you can, for example,

prevent Search from stopping on any of hundreds of
talkgroups in the Utilities agency. You can do this with just a
few key presses. To use 

ID  BLOCKOUT

just enter the

Agency- part, or the Agency-Fleet part, of the talkgroup code
and press L/O. For example, to Blockout Agency 4 in Trunk
Search, press HOLD/MAN, 0, 4, 

(decimal key), and then

L/O. For other ways to use partial AFS entry, be sure to read
the section "EDACS Reception".

You can check all IDs already locked out.

1. Press MENU/BACK.

––– OR –––

1. When you press and hold L/O for 2 seconds in trunking,

you can also check all IDs already locked out.

2. Select 

SCAN OPTION

-

TRUNK

by rotating the VFO and

pressing E.

3. Enter the bank number using the keypad and pressing E.

4. Select 

L/O  REVIEW

.

1. Press MENU/BACK.

2. Select 

SCAN OPTION

-

TRUNK

by

rotating the VFO and pressing E.

3. Select the bank number by rotating

the VFO and pressing E.

4. Select 

L/O  ID  REVIEW

and the

54

          L

LT ID:0-02-042
L/O ID REVIEW

  M1-1:4128
 867.8375 NFM
MOT ID:8192
LIST Tag 

BC250D  9/20/2 2:52 PM  Page 54