Bosch Security Systems BV NDE8000 사용자 설명서
FLEXIDOME IP starlight 8000i
Hardware Installation | en
21
Bosch Security Systems
Installation Manual
2018.11 | 01 |
Pin assignment
Pin
Connection
1
12 V out
2
GND
3
ALARM OUT
4
ALARM OUT
5
GND
6
ALARM IN 1
7
ALARM IN 2
8
GND
9
AUDIO OUT
10
AUDIO IN
Tab. 4.1: Pin assignment for 10-pin terminal
After fitting the terminal to an on-site wiring, the connection can easily be made. Plug the
terminal into the 10-pin I/O on the camera base.
Figure 4.2: Connectors on the base
1 10-pin connector
2 RJ45 Ethernet/PoE connector
3 12 VDC/24 VAC connector
4.3.2
Grounding
The camera is double-insulated and does not need grounding. However, grounding provides
improved surge protection (up to 1 kV).
The grounding connector suits cable diameters from 1 mm up to 4 mm. The following graphic
illustrates the position of the grounding connector:
Steps:
Warning!
Trained electricians only!
Work at electric appliances must only be carried out by qualified technicians.
1.
Remove any power source from the device.