Huntleigh Healthcare Limited Huntleigh Diagnostic Products Division SF1US 사용자 설명서
32
Tr
ouble Shooting
Switching Off
Hold the transducer at the right hand side of the receiver as shown on the
pictures below.
Position the letters so that the “TOCO” or “US” are as shown.
pictures below.
Position the letters so that the “TOCO” or “US” are as shown.
By moving the transducers along the right
hand side of the receiver wall the transducers
will switch off and reset accordingly
The process will take approximately 2-3
seconds.
hand side of the receiver wall the transducers
will switch off and reset accordingly
The process will take approximately 2-3
seconds.
8.2 Re-enabling
Transducers
After manually switching off the transducers, it is essential that they are docked
for recharging and enabling. After a short delay, the operating status will be
indicated (refer to section 3.2).
for recharging and enabling. After a short delay, the operating status will be
indicated (refer to section 3.2).