Baicells Technologies Co. Ltd. MBS1100 사용자 설명서
Baicells mBS1100 Base Station Installation Guide(V100R001C00,03).docx
17
4.2.5 Connect Power Connector
The weatherproof connector is adopted for power cables. First, you need to assemble
the power weatherproof connector.
In the accessories for base station, the output end of the power adaptor has red and
black power cord, where the red power cord is +48V, and the black power cord is 0V. The
output voltage is 48V DC.
The connection relationship of the power cord and the power connector is shown in
Figure 4-11 Power Adaptor Input and Output
AC
Red/V+
Black/V
-
Power
Connector
A
B
INPUT
Power Adaptor
OUTPUT
V+
V-
DC
The input of power adaptor is the AC power supply, where the voltage range is 100V ~
277V, 50/60Hz.
Make the power cable so it can reach the distance between the installation site and the
power supply system.
Strip the 12mm insulating layer with wire stripper, which is inserted into the power
connector.
It is recommended that the power cord length is kept below 1150 feet.
The connection steps of power cable is as follows.
1. Disassemble the power weatherproof connector into four parts, as shown in Figure