Baicells Technologies Co. Ltd. MBS1100 사용자 설명서
Baicells mBS1100 Base Station Installation Guide(V100R001C00,03).docx
19
5. Tighten the power cord in the socket by using T-15 torx screw driver to crimp the
threads, ensure the power cable crimping tight.
6. Screw parts 1, 2, and 3 respectively. The assembly of the power connector is
complete.
7. Connect the power connector to the PWR interface of the base station and fasten it.
8. Weatherproof the power connector. Refer to 3.5 Weatherproof Protection for more
detail. The connection is shown in Figure 4-10.
Figure 4-15 Connect the PWR Interface
9. The input of the power adaptor connects to the outlet.
If the outlet is indoors, place the power adaptor indoors.
If the outlet is outdoors, place the power adaptor in a water proof box.
4.2.6 Connect Ground Cable
The mBS1100 provides two grounding screws, which is located on the connector panel
side of the base station, as shown in Figure 4-16.
Figure 4-16 Location of Grounding Screws
1. Unscrew one grounding screw, connect the GPS lightning arrestor grounding cable