Texas Instruments DLP® LightCrafter™ Evaluation Module DLPLIGHTCRAFTER DLPLIGHTCRAFTER 데이터 시트
제품 코드
DLPLIGHTCRAFTER
Using Test Patterns
Figure 2-51. DLP LightCrafter GUI Static Color Set Button
2.10 Using Test Patterns
To display DLPC300 internal test patterns, follow these steps:
1. Set Display Mode to “Test Pattern.”
2. Select “Static Image / Test Pattern” tab as shown in
3. Pull down the menu under “Internal Test Pattern” and select the desired option. The options are:
•
Fine Checker Board
•
Solid Black
•
Solid White
•
Solid Blue
•
Solid Red
•
Vertical Lines
•
Horizontal Lines
•
Vertical Lines (Fine)
•
Horizontal Lines (Fine)
•
Diagonal Lines
•
Vertical Gray Ramp
•
Horizontal Gray Ramp
•
ANSI 4 × 4 Checker Board
4. Click on the “Set” button to display the selected pattern. See
.
Figure 2-52. DLP LightCrafter GUI Internal Test Pattern Settings
2.11 Saving and Loading Solutions
Any of DLP LightCrafter's current settings can be stored as a solution. This solution can later be recalled
or set to run as the default solution which starts after booting. To create a solution, follow these steps:
or set to run as the default solution which starts after booting. To create a solution, follow these steps:
1. Set the appropriate settings such as LED Current, Pattern Sequence bit depth, number of patterns,
input trigger, trigger period, exposure, time, display mode, and so forth.
2. Click on "Solution" tab as shown in
.
3. Type in the solution name and click “Save.”
4. To manage stored solutions, use the following buttons:
•
Load: load the selected solution
46
Operating the DLP LightCrafter
DLPU006C – January 2012 – Revised December 2013
Copyright © 2012–2013, Texas Instruments Incorporated