Texas Instruments DLP® LightCrafter™ Evaluation Module DLPLIGHTCRAFTER DLPLIGHTCRAFTER 데이터 시트

제품 코드

DLPLIGHTCRAFTER

Capturing Images using the Camera Connector

•

Default: sets the selected solution as the default solution when DLP LightCrafter boots; in the list,
this solution will be colored blue

•

Delete: erases the currently selected solution

•

Refresh: lists stored solutions

Figure 2-53. DLP LightCrafter GUI Solution Tab

2.12 Capturing Images using the Camera Connector

The DLP LightCrafter's embedded Linux system comes with the MT9P031 camera sensor driver. By
connecting this sensor to camera connector (item 14 in

) the EVM can capture images from the

sensor and send the image to the computer or to the DMD. For details about the connector, see

. The camera must be connected to DLP LightCrafter before the EVM boots to ensure the

sensor is detected.

To capture an image from the sensor and save the image to the PC, follow these steps:

1. Select the "Camera" tab as shown in

2. Click the "Capture" button.

3. Click the "Save" button.

4. To capture an image from the sensor and send the image to the DMD, click the "Preview" button.

DLPU006C – January 2012 – Revised December 2013

Operating the DLP LightCrafter