Texas Instruments TMS320C6472 Evaluation Module TMDSEVM6472LE TMDSEVM6472LE 데이터 시트

제품 코드
TMDSEVM6472LE
다운로드
페이지 269
PRODUCTPREVIEW
SPRS612G
JUNE 2009
REVISED JULY 2011
7.9
PLL2 and PLL2 Controller
The C6472 device includes a PLL2 and a software-programmable PLL2 controller. The PLL2 controller
generates different clocks required for Gigabit Ethernet. The PLL multiply factor is set to x20 for PLL2.
NOTE
The PLL controller module as described in the TMS320C6472/TMS320TCI648x DSP
Software-Programmable Phase-Locked Loop (PLL) Controller User's Guide 
(literature
number
includes a superset of features, some of which are not supported on the
C6472 DSP. The following sections describe the features that are supported; it should be
assumed that any feature not included in these sections is not supported by the C6472 DSP.
7.9.1
PLL2 Controller Device-Specific Information
7.9.1.1
Internal Clocks and Maximum Operating Frequencies
As shown in
the PLL2 controller generates EMAC reference clocks.
SYSCLK13 is used by RGMII0 (1000Mbps mode)
SYSCLK14 is used by RGMII0 (100Mbps mode) and GMII (1000Mbps mode)
SYSCLK15 is used by RGMII0 (10Mbps mode)
SYSCLK16 is used by RGMII1 (1000Mbps mode)
SYSCLK17 is used by RGMII1 (100Mbps mode)
SYSCLK18 is used by RGMII1 (10Mbps mode)
NOTE
There is a fixed operating frequency for CLKIN2 and SYSCLK13-18. The clock generator
must not be configured to exceed any of these constraints (certain combinations of external
clock input, internal dividers, and PLL multiply ratios might not be supported). For the PLL
clocks input and output frequencies, see
.
Copyright
©
2009
2011, Texas Instruments Incorporated
C64x+ Peripheral Information and Electrical Specifications
161
Product Folder Link(s) :