Texas Instruments Multi-Cal-System Basic Starter Kit MULTI-CAL-SYSTEM MULTI-CAL-SYSTEM 데이터 시트
제품 코드
MULTI-CAL-SYSTEM
Connect universal
9V supply
Three power LEDs
will illuminate
Connect USB port
to the PC
The computer may respond
with these messages
Starter System Setup
shows the connection of the 9-V power supply to the USB DAQ Platform. When you connect
power, three LEDs on the USB DAQ Platform illuminate. If the LEDs do not illuminate, check the power
connections.
connections.
Figure 20. Universal 9-V Supply to USB DAQ Platform
shows the connection of the USB cable to the USB DAQ Platform. When you make this
connection, it is recommended that you first turn your computer sound on. When the cable is plugged in,
you should hear the distinctive Microsoft
you should hear the distinctive Microsoft
®
Windows
®
sound that indicates a bew USB device was
recognized. The USB DAQ Platform uses the HID drivers included in the Windows operating system. In
some cases, Windows may display messages the first time the EVM is plugged in (as shown here).
some cases, Windows may display messages the first time the EVM is plugged in (as shown here).
Figure 21. Connect USB Cable to USB DAQ Platform
21
SBOU087A
–
August 2010
–
Revised April 2011
Multi-Cal-System Evaluation Module
Copyright
©
2010
–
2011, Texas Instruments Incorporated