Nuance comm Server D60709-22 사용자 설명서
3 SafeCom Controller
D60709-22
45
3.4.3
Register device
The device is registered when a user with Technician or Administrator rights
has logged in at the device. Once the device is registered it will appear in the
SafeCom Administrator. The device is also registered when you add it in
SafeCom Administrator.
Note: You can use the built-in Technician account TECH with the default PUK
code 12345678 and default PIN code 1234.
has logged in at the device. Once the device is registered it will appear in the
SafeCom Administrator. The device is also registered when you add it in
SafeCom Administrator.
Note: You can use the built-in Technician account TECH with the default PUK
code 12345678 and default PIN code 1234.
3.4.4
Set password to prevent unauthorized access
To prevent unauthorized access to the SafeCom Controller’s configuration we
recommend that you change the password from the default: adm. To disable
security, change the password back to adm.
1.
recommend that you change the password from the default: adm. To disable
security, change the password back to adm.
1.
Open the Advanced Configuration web page (3.3.2).
2.
Click Password.
3.
Enter the Old Password, New Password and Verify Password. The
password is maximum 8 characters.
password is maximum 8 characters.
4.
Click Save and Continue.
5.
Click Restart.
Warning: Make sure to store the password in a secure place. If you forget the
password you need to return the SafeCom Controller to SafeCom a/s for
unlocking.