Nuance comm Server D60709-22 사용자 설명서
3 SafeCom Controller
D60709-22
46
3.4.5
Assign a fixed IP address to the SafeCom Controller
The IP address can be assigned via DHCP (dynamic or fixed) or manually. The
steps below describe how to assign a fixed IP address via the SafeCom
Controller web interface.
1.
steps below describe how to assign a fixed IP address via the SafeCom
Controller web interface.
1.
Open the Advanced Configuration web page (3.3.2).
2.
Click TCP/IP.
3.
Check Manual and enter the IP address etc.
4.
Click Save and Continue.
5.
Click Restart.
3.4.6
Select user identification
1.
Open the Advanced Configuration web page (3.3.2).
2.
Click SafeCom. Change Front End Identification.
3.
Click Save and Continue to save your settings.
4.
Select Restart. Click Restart again.
You must wait approx. 1 minute while SafeCom initializes. If the control panel
on the Sharp MFP does not reflect the change in the login screen then refresh
the screen by pressing the JOB STATUS button on the Sharp MFP and then the
COPY button.
3.4.7
Disable the Test button
To prevent unauthorized users from restoring factory default you can disable
the SafeCom Controller’s test button.
1.
the SafeCom Controller’s test button.
1.
Open the Advanced Configuration web page (3.3.2).
2.
Click General.
3.
Change Enable Test Button to NO.
4.
Click Save and Continue.
Click Restart.
3.4.8
Enable Copy Control
1.
Open the Advanced Configuration web page (3.3.2).
2.
Click Printer and change Copy Enabled to YES and change Use auto
configuration to YES.
configuration to YES.
3.
Click Save and Continue.
4.
Click Restart.