Hughes HN7700S 사용자 설명서

 

4. Install the hex nut provided with the protection module on the 

SAT IN terminal post and tighten it.

5. Reconnect the coaxial cable to the SAT IN terminal post.

Make sure the cable is securely tightened. (See the Caution 
statement that follows Figure 9 on page 16.)

6. Connect the longer phone cable from the LINE port on the 

protection module to the telephone jack (or to a splitter if 
other devices share the telephone line). See Figure 55.

7. If you use a splitter, connect the splitter to a telephone jack. 

Follow these steps to verify VADB functionality:

1. Open a web browser on the installer PC.
2. Access the System Control Center Advanced Pages by typing 

 in the 

browser address bar and pressing E

.

3. Verify that the VADB link is in use:

a. From the Advanced Menu, 

VADB

 section, click 

.

b. Verify that 

VADBLINK

 appears in the 

Link in use

 field as 

shown in Figure 57.

Figure 57:  Verifying the VADB link

SESSION ACTIVE and VADBLINK 
show that the VADB link is active.