Siemens REV23 사용자 설명서
3/12
Siemens Building Technologies
Room Temperature Controller REV23
CE1N2264en
HVAC Products
23.04.2002
Display
Time of day
° C
Room temperature
Change batteries (display appears about 3 months before bat-
teries are exhausted)
teries are exhausted)
Remote operation active
Holiday mode active
Selection of operating mode (only one operating mode is activ)
Automatic mode
Comfort mode
Economy mode
Frost protection or overtemperature protection
24-hour mode with one heating or cooling period
(heating or cooling period is automatically generated from the
current 24-hour program)
24-hour mode with one heating or cooling period
(heating or cooling period is automatically generated from the
current 24-hour program)
Temporary change of the current setpoint temperature
(change only active until the next switching point is reached)
(change only active until the next switching point is reached)
° C
When pressing the + or – button once, the adjusted setpoint
temperature will be displayed. It can be readjusted in incre-
ments of 0.2 °C (max. +/- 4 °C).
temperature will be displayed. It can be readjusted in incre-
ments of 0.2 °C (max. +/- 4 °C).
Override button
In operating modes
and
, this button can be used to switch from comfort
to economy temperature, or vice versa. The selection is maintained until the
next switching point is reached or until the operating mode is changed.
next switching point is reached or until the operating mode is changed.
Menu-driven user settings: 4 main menus available
Time of day and day
Main menu
Submenu
Settings
h
Current time of day
Current day of week
Temperature
Main menu
Submenu
Factory settings – heating / cooling
T
Setpoint comfort mode
19 °C
23 °C
Setpoint economy mode
16 °C
29 °C
Setpoint frost
or overtemperature protection
or overtemperature protection
5 °C
35 °C