Siemens REV23 사용자 설명서
5/12
Siemens Building Technologies
Room Temperature Controller REV23
CE1N2264en
HVAC Products
23.04.2002
The controller generates the 24-hour operating mode from the current 24-hour pro-
gram. It automatically selects the switch-on time of the first heating / cooling period and
the switch-off time of the last heating / cooling period to generate and display a com-
plete heating / cooling period. The comfort temperature used by the controller is the
currently stored standard setpoint of the continuous operating mode
gram. It automatically selects the switch-on time of the first heating / cooling period and
the switch-off time of the last heating / cooling period to generate and display a com-
plete heating / cooling period. The comfort temperature used by the controller is the
currently stored standard setpoint of the continuous operating mode
. The self-
generated 24-hour operating mode is maintained until another operating mode is se-
lected.
lected.
2264
Z
01
°C
18
20
22
08
10
18
22
h
T
T
Automatically generated
Current 24-hour switching program
24-hour operating mode
The switching program can be used as a 7-day or 24-hour switching program,
depending on programming. It is also possible to select one of the continuous operating
modes
depending on programming. It is also possible to select one of the continuous operating
modes
with which the switching program is not used.
With the 7-day switching program, it is possible to program all days individually, the
working days (1-5), the weekend (6-7), or the entire week (1-7).
When a heating / cooling period is programmed, 3 different switching patterns are
available.
It is possible to select 1, 2 or 3 heating / cooling periods.
For each heating / cooling period, the start time, end time and comfort setpoint are to
be entered. In between heating / cooling periods, it is always the same economy tem-
perature setpoint that is used. This economy temperature setpoint can be adjusted on
the temperature menu.
working days (1-5), the weekend (6-7), or the entire week (1-7).
When a heating / cooling period is programmed, 3 different switching patterns are
available.
It is possible to select 1, 2 or 3 heating / cooling periods.
For each heating / cooling period, the start time, end time and comfort setpoint are to
be entered. In between heating / cooling periods, it is always the same economy tem-
perature setpoint that is used. This economy temperature setpoint can be adjusted on
the temperature menu.
2261
Z
0
4
16
°C
18
20
22
08
10
18
22
h
Heating
period 1
period 1
Heating
period 2
period 2
The holiday function is to be selected on the user menu. Set the start of the holiday
period (day of departure/
period (day of departure/
/ day of week), the duration and the temperature
setpoint (
) during your absence. This will enable the controller to maintain the re-
quired temperature for a period of up to 99 days. Every midnight, the counter subtracts
one day.
one day.
24-hour operating mode
Example
Switching program
Example with 2 heating
periods per day
periods per day
Holiday function