Elica ETT136SS 사용자 매뉴얼
5
List of Materials
Removing the packaging
CAUTION!
Remove carton carefully, wear gloves to protect against sharp edges.
WARNING!
Remove the protective film covering the product before putting into
operation.
Parts supplied
• Hood assembly with blower & light bulb already installed.
• Metal grease filter.
• Hardware bag with:
• Use, care and installation guide
• 2 - d5.3 x 20 mm metal washers
• 4 - 6 x 80 mm screws
• 4 - 3.5 x 9.5 mm mounting screws
• 4 - 4.2 x 19 mm mounting screws
• 2 - 10 x 50 mm wall anchors
Parts needed
• Home power supply cable
• ½” (12.7 mm) UL listed or CSA approved strain relief
• 3 UL listed wire connectors
• 1 wall or roof cap
• 10” round metal vent system
Product Dimensions
Parts not supplied
Optional Accessories
1. Duct Cover Kits
36”
42”
48”
6”
height
EXXCEK02
ECLCEK07
ECLCEK05
12”
height
EXXCEK04
ECLCEK08
EXXCEK06
Tools/Materials required
• Level
• Drill with 1¼” (3.2 cm),⅛” (3.2 mm), and
5
⁄
16
” (7.9 mm)
drill bits
• Pencil
• Wire stripper or utility knife
• Tape measure or ruler
• Pliers
• Caulking gun and weatherproof caulking compound
• Vent clamps
• Jigsaw or keyhole saw
• Flat-blade screwdriver
• Metal snips
10”
(25.4cm)
18
7
⁄
8
”
(48cm)
36” (91.4cm)
42” (106.7cm)
48” (121.9cm)
9
7
⁄
8
”
(25cm)
11
13
⁄
16
”
(30.2cm)
24
1
⁄
4
”
(61.6cm)
Top view
10” (25.4 cm)
36”: 12” (30.6 cm)
42”: 15” (38.3 cm)
48”: 18” (45.9 cm)
2
1
⁄
3
”
(5.9 cm)
=
=
6” (15.24cm) or
12” (30.48cm)
18
7
⁄
8
”
(48cm)
11
7
⁄
8
” (30cm)
36” (91.4cm)
42” (106.7cm)
48” (121.9cm)
Duct cover view